French 
English 
Dutch 
A high-performance all-in-one rotary evaporator with smart, self-cooling condensers and zero material waste
Up to 3L of ethanol per hour
Reduce electricity consumption by over 50%, never have to change chiller fluids again, and dramatically decrease your run times! Ecodyst’s Hydrogen is a high performance, self-cooling rotary evaporator with a compact footprint. The eco-friendly, energy-efficient, sustainable rotovap uses a built-in condenser which eliminates the need for glycol, dry ice or water while massively reducing coolant pull-down times.
By eliminating coolant and cutting electricity use by more than half, the Hydrogen delivers substantial operating cost savings. By combining the functions of a recirculating chiller and a rotary evaporator in the same compact body, what would ordinarily take two pieces of equipment is done with just one, saving precious lab space while eliminating messy tubing and leaks.
Tired of waiting for your chiller to get cold? With the Ecodyst, the condenser is cold almost immediately. The condenser will cool to -10°C in just one minute, or all the way to -35°C in five minutes.
Features
- LCD display
- 5L heating bath, room temp to 180°C
- Motorized evaporating flask lift
- Speed 20–280 rpm, timer, interval operation
- Up to 3000 mL evaporator flask size
- Chemical-resistant stainless steel spring PTFE vapor tub
- Does not require dry ice or glycol
- Always available on-demand condenser with set point as low as -40 °C
- Faster rates of evaporation
- Ready in 60 seconds, reaches -20 °C in 90 seconds
- Only action required is to turn it ON
Specifications
Equipment |
|
| Dimensions (approx.) | 17.75″ L x 16.25″ W x 29″ H |
| Weight | 120lbs |
Electrical |
|
| Total power usage | 1400 watts |
| Voltage | 100-120/200-240V, 50-60Hz Two standard 115V (or one 230V) plugs |
Technical |
|
| EcoChyll cooling capacity | see above table |
| EcoChyll minimum temperature | -40°C |
| Display | LCD |
| Motor Type | Brushless DC motor |
| Heating bath maximum temperature | Room temperature to 180°C |
| Heating power | 1300watts |
| Heating bath volume | 5L |
| Temperature control accuracy | Water +/- 1°C, oil +/- 3°C |
| Rotational drive | 20 to 280rpm, clockwise and anti-clockwise |
| USB interface | Yes |
| Timer | Yes, 1 to 999min |
| Protection class | IP20, IP21 |
| Permissable ambient temperature | 5 to 40°C |
| Permissable relative humidity | 80% RH |
| Metal parts | Stainless steel 316 |
| Glass parts | Borosilicate glass |
| Condensation coils | coated with chemically-resistant fluoropolymer Halar |
