Findenser saves water and prevents laboratory flooding, by replacing water-cooled condensers in over 95% of common chemistry applications.
No running water required
Findenser comprises of an internal glass condenser and an external, finned aluminium jacket, between which a small amount of water is permanently sealed.
Replace water-cooled condensers
The glass condenser design has a greater internal surface area than traditional air condensers, increasing heat transfer capacity.
Increased heat transfer
The finned jacket fits around the glass condenser, further increasing the external surface area.
|Length x Diameter||400mm x 72mm||275mm x 72mm|
|Joints||B19, B24, B29||B14, B19, B24|
|Inner or wetted parts||Borosilicate glass||Borosilicate glass|
|Finned jacket||Anodised aluminium||Anodised aluminium|
|Plug and Seal||Acetal & HT Silicone||Acetal & HT Silicone|
|Max solvent bpt||155˚C||155˚C|
|Oven drying Max Temp.||60˚C||60˚C|
|Dishwasher Max Temp.||50˚C||50˚C|
|Autoclaving||Do Not Autoclave||Do Not Autoclave|
|Ambient operating temp.||0˚C to 24˚C||0˚C to 24˚C|