Choose your region:

Teledyne Labs

Hydrogen Rotary Evaporator

High-performance all-in-one rotary evaporator
Zero material waste
Does not require dry ice or glycol
Faster rates of evaporation

Hydrogen Rotary Evaporator

Self-cooling rotary evaporator

A high-performance all-in-one rotary evaporator with smart, self-cooling condensers and zero material waste!

Up to 3L of ethanol per hour

Reduce electricity consumption by over 50%, eliminate the need to change chiller fluids, and dramatically shorten run times! Ecodyst’s Hydrogen is a high performance, self-cooling rotary evaporator with a compact footprint. This eco-friendly, energy-efficient, sustainable rotovap features a built-in condenser, eliminating the need for glycol, dry ice, or water while significantly reducing coolant pull-down times.

By eliminating the need for coolant and reducing electricity use by over 50%, the Hydrogen delivers significant operating cost savings. Combining the functions of a recirculating chiller and a rotary evaporator in the same compact unit, it replaces what would normally require two pieces of equipment, saving valuable lab space while eliminating messy tubing and leaks.

Tired of waiting for your chiller to cool? With Ecodyst, the condenser reaches -10°C in just one minute and can achieve -35°C in only five minutes, delivering almost immediate cooling.

 

Features of the self-cooling rotary evaporator: 

  • LCD display​
  • 5L heating bath, room temp to 180°C
  • Motorized evaporating flask lift
  • Speed 20–280 rpm, timer, interval operation
  • Up to 3000 mL evaporator flask size
  • Chemical-resistant stainless steel spring PTFE vapor tub
  • Does not require dry ice or glycol
  • Always available on-demand condenser with set point as low as -40 °C
  • Faster rates of evaporation
  • Ready in 60 seconds, reaches -20 °C in 90 seconds
  • Only action required is to turn it ON

 

Specifications of the self-cooling rotary evaporator:

​​Equipment​
​
​Dimensions (approx.) ​17.75″ L x 16.25″ W x 29″ H
​Weight ​120lbs
​Electrical
​​
​Total power usage ​1400 watts
​Voltage ​100-120/200-240V, 50-60Hz
​Two standard 115V (or one 230V) plugs
​Technical
​
​EcoChyll cooling capacity ​see above table
​EcoChyll minimum temperature ​-40°C
​Display ​LCD
​Motor Type ​Brushless DC motor
​Heating bath maximum temperature ​Room temperature to 180°C
​Heating power ​1300watts
​Heating bath volume ​5L
​Temperature control accuracy ​Water +/- 1°C, oil +/- 3°C
​Rotational drive ​20 to 280rpm, clockwise and anti-clockwise
​USB interface ​Yes
​Timer ​Yes, 1 to 999min
​Protection class ​IP20, IP21
​Permissable ambient temperature ​5 to 40°C
​Permissable relative humidity ​80% RH
​Metal parts ​Stainless steel 316
​Glass parts ​Borosilicate glass
​Condensation coils ​coated with chemically-resistant fluoropolymer Halar

Related instruments

CombiFlash NextGen 300

Flash Chromatography System for operation up to 300 psi (20 bar), configurable to meet your needs
Flow rates from 1 to 300 mL/min
Operating pressure up to 150 psi (10 bar) Can be upgraded to 300 psi (20 bar)​

CombiFlash NextGen 300+

The CombiFlash NextGen 300+ comes standard with all options installed
Flow rates from 1 to 300 mL/min
Operating pressure up to 300 psi (20 bar)

Last viewed products

No products found

Please select your country

By selecting your country, we can show you the products that are available for you and your organisation.