Choose your region:

Only available in Belgium and Luxembourg

Agi

Pilot Plant Filter Reactor PLUS

Pilot-scale filter reactor for crystallization, filtration and product recovery
Scalable up to 100 L
Combines reaction, crystallization, filtration, washing and drying in a single vessel
Working temperature range from -90 °C to +200 °C

Pilot Plant Filter Reactor PLUS

Pilot-scale filter reactor for crystallization, filtration and product recovery

The AGI Pilot Plant Filter Reactor PLUS exists for demanding crystallization processes by combining the functions of a reactor and a filter in a single system. The complete crystallization workflow can be carried out without opening the vessel, from crystal formation and filtration to product washing and drying.

The system is suitable for process development, kilo lab work and pilot-scale production, allowing large quantities of crystalline product to be processed safely while reducing handling steps and the risk of contamination.

Functionalities 

By combining reaction and filtration in one vessel, the Pilot Plant Filter Reactor PLUS simplifies crystallization workflows and eliminates the need to transfer material between separate pieces of equipment.

The system supports:

  • Reaction under vacuum or atmospheric pressure
  • Vacuum- or gravity-assisted filtration
  • Product washing and drying
  • Temperature regulation and monitoring
  • Reflux condensation
  • Distillation
  • In-stand distillate cooling and collection
  • Pressure monitoring and relief
  • Inert atmosphere processes
  • Agitation
  • Dosing of solids and liquids

Additional functionality are available on request.

Recover end product with ease 

 width=The filter support structure simplifies product recovery. Using a rotating lever mechanism, it is possible to uncouple, lower, and move the filter assembly sideways, allowing smooth, safe and controlled collection of the filtrate.

This design makes handling valuable products easier while helping to minimize product loss during collection.

Effective filtration 

The filtration assembly provides reliable separation while preventing leaks and bypass.

The system includes:

  • A sintered filter with an approximate pore size of 100 μm to support the filter membrane
  • Double PTFE gaskets that secure the filter cloth
  • An O-ring that helps prevent leakage of solids, liquids and gases
  • Compatibility with filter membranes up to 3 mm thick

Because filter membrane pore sizes vary depending on the application, filter membranes are not included as standard.

Full jacket design for high thermal performance 

The process vessel features a full thermal jacket that completely surrounds the vessel, maximizing heat transfer throughout the process. The filter assembly and flush valve are designed with minimal dead space to improve process performance.

Key design features include:

  • Full jacketed vessel for efficient thermal transfer
  • High-performance process vessel
  • Filter design with low dead volume

The system offers a working temperature range from -90 °C to +200 °C.

Accessories for process development

The Pilot Plant Filter Reactor PLUS is suitable for both pilot-scale production and process development. Its PFA-coated stainless steel lid includes adaptable multipurpose 40A ports that accommodate a range of accessories, including:

  • Purge port
  • Pressure gauge
  • Hand hole
  • Safety valve
  • Condenser
  • Dropping funnel
  • Condensate cooler
  • Condensate receiver
  • Stirrer seal
  • Temperature sensor

These accessories allow users to optimize crystallization processes for specific applications. For condenser configuration, 10 L models are supplied with a vertical condenser, while 20 L and 30 L models use diagonal condensers.

Designed for efficient cleaning

The reactor incorporates several features that simplify cleaning and help reduce the risk of cross-contamination between batches.

Unlike conventional grooved flanges that can retain residues, the reactor uses a flat flange that is easier to wipe clean. In the filtration section, the gaskets, O-ring and sintered filter are removable, while the PTFE filter base incorporates well-defined grooves for easier access during cleaning. The removable flush valve features a run-off design that allows complete drainage.

Key features

  • Combines reaction, crystallization, filtration, washing and drying in a single vessel
  • Suitable for process development, kilo lab and pilot-scale production
  • Full crystallization process can be performed without opening the vessel
  • Vacuum- or gravity-assisted filtration
  • Working temperature range from -90 °C to +200 °C
  • Full jacketed vessel for efficient thermal transfer
  • Filter assembly with minimal dead volume
  • Rotating lever mechanism for safe and convenient product collection
  • PFA-coated stainless steel lid with adaptable multipurpose ports
  • Easy-to-clean flat flange and removable filtration components
  • Support structure with castors for mobility
  • Scalable up to 100 L

General specifications

Vessel capacity 10 L, 20 L and 30 L
Vessel type Double wall, full jacket
Filtration area 317.3 cm² (10 L), 514.7 cm² (20 L), 711.6 cm² (30 L)
Operating pressure Full vacuum to atmospheric pressure
Operating jacket pressure Up to +0.5 barG (0.05 MPa)
Operating temperature -90 °C to +200 °C
ΔT – Thermal shock resistance 110 °C (double wall)

Note:
Overhead stirrer, circulator and chiller are not included
Wetted parts: Borosilicate Glass 3.3, PTFE, FFKM, PFA

Questions about your application?

Our Xperts are happy to answer your questions and provide additional information about this instrument and its applications.

Frequently asked questions

A pilot-scale filter reactor is an integrated process vessel that combines reaction, crystallization, filtration, washing, and drying in a single system. The AGI Pilot Plant Filter Reactor PLUS allows the complete crystallization workflow to be performed without transferring material between separate pieces of equipment.

The AGI Pilot Plant Filter Reactor PLUS is used for process development, kilo lab operations, pilot-scale production, crystallization processes, filtration, and product recovery. It is designed to process crystalline materials safely and efficiently while reducing handling steps.

A filter reactor allows crystallization, filtration, washing, and drying to take place in one vessel. This eliminates product transfers between multiple systems, helping reduce contamination risks, material losses, and process complexity.

Combining crystallization and filtration in one vessel streamlines operations and reduces manual handling. This improves process efficiency while helping maintain product quality and reproducibility.

A closed process helps reduce contamination risks, minimizes operator exposure, and decreases the likelihood of product loss during processing and recovery.

Efficient product recovery helps maximize yield and reduces losses of valuable materials during filtration and collection.

Downloads

No downloads available

Related instruments

Orb Pilot Reactor

Modular, floor-standing jacketed reactor system designed for scaling up batch processes
Modular pilot-scale jacketed reactor for 10 L to 50 L vessels
Stirring up to 500 rpm and 400 Ncm continuous torque

Benchtop Filter Reactor

Benchtop Filter Reactor that combines the functions of a reactor and a filter in a single benchtop system
Working temperature range from -40 °C to +200 °C
Suitable for crystallization, filtration, washing and vacuum drying

Atlas HD Modular Jacketed Reactor

Modular jacketed reactor platform for 50 mL to 5 L vessels
Automated control of temperature, stirring and dosing
Operating temperature range from -90 °C to +250 °C

Last viewed products

No products found

Contact our Xperts

Prefer to give us a call?

Belgium & Luxembourg
+32 (02)2 334 22 70

The Netherlands
+31 (0)294 280 599

Please select your country

By selecting your country, we can show you the products that are available for you and your organisation.