Choose your region:

How is chromatography applied in environmental testing in 2026?

Chromatography is one of the most widely used analytical techniques in environmental testing, enabling laboratories to detect, identify, and quantify pollutants in water, soil, air, and biological samples with high precision. In 2026, it remains the backbone of environmental analysis across regulatory, industrial, and research settings throughout the Benelux and beyond. The sections below address the most common questions about how chromatography is applied in environmental work today.

What types of pollutants can chromatography detect in the environment?

Chromatography can detect an exceptionally wide range of environmental pollutants, including pesticides, heavy metal complexes, industrial solvents, polycyclic aromatic hydrocarbons (PAHs), pharmaceuticals, endocrine-disrupting compounds, and per- and polyfluoroalkyl substances (PFAS). Because it separates complex mixtures into individual components, it is suited to both targeted analysis and broad screening of contaminated samples.

In practice, environmental laboratories use chromatographic methods to monitor contaminants across several categories:

  • Organic micropollutants such as pesticide residues and herbicides in agricultural runoff
  • Persistent organic pollutants (POPs) including PCBs and dioxins in sediment and soil
  • Emerging contaminants such as PFAS, pharmaceutical residues, and personal care product compounds in surface water and groundwater
  • Volatile organic compounds (VOCs) in air samples and industrial discharge
  • Polycyclic aromatic hydrocarbons in soil from contaminated industrial sites

The versatility of chromatography makes it indispensable for environmental monitoring programs, where the range of target analytes is broad and detection limits are often extremely low.

Which chromatography techniques are used in environmental testing?

The most commonly applied chromatography techniques in environmental testing are gas chromatography coupled with mass spectrometry (GC-MS) and high-performance liquid chromatography (HPLC). GC-MS environmental analysis is the standard method for volatile and semi-volatile organic compounds, while HPLC environmental testing is preferred for polar, non-volatile, or thermally labile compounds that cannot withstand the heat required for gas chromatography.

Each technique serves a distinct analytical purpose. GC-MS is widely used for pesticide screening, VOC analysis, and PAH quantification in soil and air. HPLC is the method of choice for pharmaceutical residues, herbicides, and certain PFAS compounds in water matrices. Liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS) has become increasingly important for trace-level detection of complex contaminants, offering both high sensitivity and structural confirmation.

Ion chromatography (IC) is another relevant technique, particularly for the analysis of inorganic anions such as nitrates, sulfates, and phosphates in water quality monitoring. Together, these methods form a complementary toolkit that environmental laboratories draw on depending on the matrix and target analyte.

How does chromatography detect PFAS in water and soil?

PFAS detection in water and soil relies primarily on liquid chromatography coupled with high-resolution or tandem mass spectrometry (LC-MS/MS). This combination provides the sensitivity and specificity needed to quantify PFAS at the extremely low concentration levels now required by regulatory frameworks, often in the nanogram-per-liter range for drinking water.

The analytical challenge with PFAS lies in their chemical stability and the wide structural diversity of the compound class. LC-MS/MS addresses this by separating individual PFAS compounds based on their physicochemical properties and then confirming their identity through characteristic fragmentation patterns. Solid-phase extraction (SPE) is typically used during sample preparation to concentrate PFAS from water or extract them from soil matrices before chromatographic analysis.

Water quality chromatography for PFAS has become one of the most active areas of method development in environmental analysis. Regulatory pressure in the EU and internationally has driven laboratories to expand their PFAS screening panels and improve detection limits, making robust LC-MS/MS workflows a core requirement for environmental testing facilities in 2026.

What sample preparation steps are required before chromatographic analysis?

Before chromatographic analysis, environmental samples require preparation steps that remove matrix interferences, concentrate target analytes, and convert the sample into a form compatible with the chosen instrument. The specific steps depend on the sample type (water, soil, air, or biological tissue) and the target compounds.

For water samples, the most common preparation workflow follows these steps:

  1. Filtration to remove suspended particles that would interfere with the column or detector
  2. Solid-phase extraction (SPE) to concentrate trace-level analytes and remove matrix components
  3. Solvent elution to recover analytes from the SPE cartridge into an appropriate solvent
  4. Evaporation and reconstitution to further concentrate the extract and match the solvent to the chromatographic method
  5. Internal standard addition to enable accurate quantification and correct for recovery losses

Soil and sediment samples require additional steps such as extraction using pressurized liquid extraction (PLE) or sonication, followed by cleanup to remove co-extracted humic acids and lipids. Air samples collected on sorbent tubes undergo thermal desorption or solvent extraction before injection. Thorough sample preparation is often the most critical factor in achieving reliable, low-level detection in environmental testing.

How do regulatory standards shape chromatography requirements in environmental labs?

Regulatory standards directly define which chromatography techniques environmental laboratories must use, what detection limits they must achieve, and how they must validate and document their methods. In the EU, frameworks such as the Water Framework Directive, the Drinking Water Directive, and national soil quality standards specify priority substances and set maximum permissible concentrations that drive analytical requirements.

Laboratories operating under these frameworks typically need to demonstrate method validation, including linearity, precision, accuracy, and detection limits, before results can be accepted by regulators. Quality management systems such as ISO 17025 accreditation are commonly required for environmental testing laboratories, ensuring that chromatographic methods are applied consistently and traceably.

In practice, this means that environmental labs must invest in instrumentation capable of meeting these performance criteria and must maintain detailed records of calibration, quality control samples, and instrument performance. Regulatory updates, such as the expansion of the EU watch list for emerging contaminants, regularly force laboratories to adapt their chromatography workflows and validate new methods for previously unmonitored compounds.

What advances in chromatography technology are improving environmental testing in 2026?

In 2026, several advances in chromatography technology are making environmental testing faster, more sensitive, and more capable of handling complex sample matrices. High-resolution mass spectrometry (HRMS) combined with liquid or gas chromatography is enabling non-targeted screening, where laboratories can identify unknown contaminants in a sample without prior knowledge of what to look for.

Miniaturized and field-portable chromatography systems are also gaining traction, allowing on-site screening of contaminated sites rather than requiring laboratories to wait for turnaround times. While laboratory-grade instruments remain the standard for regulatory reporting, portable systems are valuable for rapid site assessment and prioritization.

Improvements in column technology, including sub-two-micron particle columns for ultra-high-performance liquid chromatography (UHPLC), have significantly shortened run times while maintaining or improving resolution. This increases laboratory throughput, which is important given the growing volume of environmental monitoring samples driven by regulatory requirements. Automation of sample preparation, particularly SPE workflows, is also reducing manual handling errors and improving reproducibility across large sample batches.

How ChemSPX supports environmental testing laboratories

Environmental laboratories in the Benelux that rely on chromatography for pollutant analysis need more than just instrumentation. They need expert guidance on selecting the right system for their matrix and target compounds, and ongoing support to keep instruments performing at the level that regulatory compliance demands.

ChemSPX works with environmental testing labs across the Benelux region by offering:

  • Expert advice on chromatography system selection for specific environmental matrices and analytes
  • Application-level support from Product Specialists with hands-on knowledge of environmental workflows
  • Installation, qualification, and validation services including IQ/OQ in line with GMP and GLP standards
  • Ongoing service and maintenance to ensure instrument reliability and compliance over time

Whether you are setting up a new environmental testing workflow or optimizing an existing chromatography setup, the ChemSPX team is available to help. Contact ChemSPX to discuss your requirements with a specialist.

Frequently Asked Questions

How do I know which chromatography technique is right for my specific environmental samples?

The best technique depends on two key factors: the physical and chemical properties of your target analytes and the nature of your sample matrix. As a general rule, GC-MS is the go-to choice for volatile and semi-volatile compounds such as VOCs, PAHs, and many pesticides, while LC-MS/MS is better suited for polar, non-volatile, or thermally labile compounds like PFAS, pharmaceuticals, and certain herbicides. If you are unsure, consulting with an application specialist who has hands-on experience with your specific matrix — whether that is drinking water, industrial soil, or biological tissue — will help you avoid costly method development detours.

What are the most common mistakes environmental labs make during sample preparation, and how can they be avoided?

The most frequent errors include inadequate blank controls that allow PFAS contamination from labware or solvents to go undetected, inconsistent SPE loading volumes that affect recovery rates, and failure to add internal standards early enough in the workflow to correct for extraction losses. A closely related issue is using inappropriate storage conditions between sampling and analysis, which can cause analyte degradation or adsorption to container walls, particularly for trace-level PFAS and pharmaceutical residues. Establishing a well-documented and regularly audited sample preparation SOP, and running method blanks and spiked recovery samples with every batch, is the most reliable way to catch and correct these issues before they affect reported results.

How do detection limits in environmental chromatography translate into real-world regulatory compliance?

Regulatory frameworks such as the EU Drinking Water Directive set maximum allowable concentrations for specific contaminants — for example, a total PFAS limit of 0.5 µg/L in drinking water — which means your method’s limit of quantification (LOQ) must reliably sit well below that threshold to provide a meaningful safety margin. In practice, laboratories typically aim for an LOQ at least 5–10 times lower than the regulatory limit to account for measurement uncertainty and matrix effects. If your current instrumentation cannot reach the required detection limits for newly regulated compounds, it is worth evaluating whether a sensitivity upgrade, such as moving from single quadrupole to triple quadrupole MS, or improving your sample concentration step, can bridge the gap without a full system replacement.

Can non-targeted screening with HRMS replace targeted chromatography methods for routine environmental monitoring?

Not yet for regulatory reporting purposes, but it is increasingly valuable as a complementary tool. Non-targeted high-resolution mass spectrometry (HRMS) screening excels at identifying unknown or unexpected contaminants in a sample, which is particularly useful for site investigations or emerging contaminant research. However, regulatory submissions still require validated, targeted methods with documented detection limits, calibration ranges, and quality control data as stipulated by frameworks like ISO 17025. The most forward-looking environmental labs are running both in parallel — using HRMS for discovery and broad screening, and validated targeted methods for the quantitative reporting that regulators require.

How often should environmental chromatography instruments be calibrated and maintained to stay compliant?

Calibration frequency depends on your quality management system requirements, instrument type, and the regulatory framework you operate under, but most ISO 17025-accredited environmental labs calibrate their GC-MS and LC-MS/MS systems at the start of each analytical sequence and perform full multi-point calibration curves at defined intervals — typically daily or per batch. Preventive maintenance schedules, including column replacement, ion source cleaning, and detector checks, should be defined in your instrument qualification documentation and followed consistently. Keeping detailed maintenance and calibration logs is not just good practice; it is a direct requirement for accreditation audits and is often scrutinized during regulatory inspections.

What should environmental labs consider when expanding their PFAS testing panel to include more compounds?

Expanding a PFAS panel requires more than simply adding new compounds to an existing method — you need to verify that your LC-MS/MS system can resolve the new analytes chromatographically from existing ones and that your SPE extraction protocol recovers them efficiently across the relevant matrix types. Ultra-short-chain PFAS, for example, are notoriously difficult to retain on standard SPE sorbents and may require modified cleanup approaches. You should also review your labware and solvent blanks, as fluoropolymer-containing materials in your sample handling workflow can introduce background contamination that becomes significant at the low concentration levels now required by EU regulation.

Is it worth investing in portable or field-based chromatography systems for site investigations, or should all analysis remain in the laboratory?

Field-portable systems are genuinely useful for rapid site triage — screening multiple locations quickly to identify hotspots and prioritize where to collect samples for full laboratory analysis — but they are not a replacement for laboratory-grade instrumentation when it comes to regulatory-grade quantification. The sensitivity, resolution, and validated performance of benchtop GC-MS or LC-MS/MS systems remain the standard for any data that will be submitted to regulators or used in legal or remediation contexts. A practical approach for many environmental monitoring programs is to use portable instruments to reduce the number of samples sent to the laboratory, which can meaningfully cut costs and turnaround times without compromising the quality of final reported results.

Related Articles

This content was generated with the help of AI and it may contain mistakes

Contact our Xperts

Prefer to give us a call?

Belgium & Luxembourg
+32 (02)2 334 22 70

The Netherlands
+31 (0)294 280 599

Please select your country

By selecting your country, we can show you the products that are available for you and your organisation.