Pilot-scale filter reactor for crystallization, filtration and product recovery
The AGI Pilot Plant Filter Reactor PLUS exists for demanding crystallization processes by combining the functions of a reactor and a filter in a single system. The complete crystallization workflow can be carried out without opening the vessel, from crystal formation and filtration to product washing and drying.
The system is suitable for process development, kilo lab work and pilot-scale production, allowing large quantities of crystalline product to be processed safely while reducing handling steps and the risk of contamination.
Functionalities
By combining reaction and filtration in one vessel, the Pilot Plant Filter Reactor PLUS simplifies crystallization workflows and eliminates the need to transfer material between separate pieces of equipment.
The system supports:
- Reaction under vacuum or atmospheric pressure
- Vacuum- or gravity-assisted filtration
- Product washing and drying
- Temperature regulation and monitoring
- Reflux condensation
- Distillation
- In-stand distillate cooling and collection
- Pressure monitoring and relief
- Inert atmosphere processes
- Agitation
- Dosing of solids and liquids
Additional functionality are available on request.
Recover end product with ease

This design makes handling valuable products easier while helping to minimize product loss during collection.
Effective filtration
The filtration assembly provides reliable separation while preventing leaks and bypass.
The system includes:
- A sintered filter with an approximate pore size of 100 μm to support the filter membrane
- Double PTFE gaskets that secure the filter cloth
- An O-ring that helps prevent leakage of solids, liquids and gases
- Compatibility with filter membranes up to 3 mm thick
Because filter membrane pore sizes vary depending on the application, filter membranes are not included as standard.
Full jacket design for high thermal performance
The process vessel features a full thermal jacket that completely surrounds the vessel, maximizing heat transfer throughout the process. The filter assembly and flush valve are designed with minimal dead space to improve process performance.
Key design features include:
- Full jacketed vessel for efficient thermal transfer
- High-performance process vessel
- Filter design with low dead volume
The system offers a working temperature range from -90 °C to +200 °C.
Accessories for process development
The Pilot Plant Filter Reactor PLUS is suitable for both pilot-scale production and process development. Its PFA-coated stainless steel lid includes adaptable multipurpose 40A ports that accommodate a range of accessories, including:
- Purge port
- Pressure gauge
- Hand hole
- Safety valve
- Condenser
- Dropping funnel
- Condensate cooler
- Condensate receiver
- Stirrer seal
- Temperature sensor
These accessories allow users to optimize crystallization processes for specific applications. For condenser configuration, 10 L models are supplied with a vertical condenser, while 20 L and 30 L models use diagonal condensers.
Designed for efficient cleaning
The reactor incorporates several features that simplify cleaning and help reduce the risk of cross-contamination between batches.
Unlike conventional grooved flanges that can retain residues, the reactor uses a flat flange that is easier to wipe clean. In the filtration section, the gaskets, O-ring and sintered filter are removable, while the PTFE filter base incorporates well-defined grooves for easier access during cleaning. The removable flush valve features a run-off design that allows complete drainage.
Key features
- Combines reaction, crystallization, filtration, washing and drying in a single vessel
- Suitable for process development, kilo lab and pilot-scale production
- Full crystallization process can be performed without opening the vessel
- Vacuum- or gravity-assisted filtration
- Working temperature range from -90 °C to +200 °C
- Full jacketed vessel for efficient thermal transfer
- Filter assembly with minimal dead volume
- Rotating lever mechanism for safe and convenient product collection
- PFA-coated stainless steel lid with adaptable multipurpose ports
- Easy-to-clean flat flange and removable filtration components
- Support structure with castors for mobility
- Scalable up to 100 L
General specifications
| Vessel capacity | 10 L, 20 L and 30 L |
| Vessel type | Double wall, full jacket |
| Filtration area | 317.3 cm² (10 L), 514.7 cm² (20 L), 711.6 cm² (30 L) |
| Operating pressure | Full vacuum to atmospheric pressure |
| Operating jacket pressure | Up to +0.5 barG (0.05 MPa) |
| Operating temperature | -90 °C to +200 °C |
| ΔT – Thermal shock resistance | 110 °C (double wall) |
Note:
Overhead stirrer, circulator and chiller are not included
Wetted parts: Borosilicate Glass 3.3, PTFE, FFKM, PFA
